Hacker GitHub

← All repos

litex-hub/linux-on-litex-vexriscv

View on GitHub ↗ ★ 750 Python

Linux on LiteX-VexRiscv

8 mentions on Hacker News by 5 people: 1 story, 7 comments · first 2020-01-02 · latest 2024-10-23

Mentions per year 8 mentions · busiest year 2023 (3)
20082026
AllStoriesComments NewestTopOldest
  1. …ets.com/products/orange-crab-85f-lattice-ecp5-... Which you can build a RISCV core + linux for using: https://github.com/litex-hub/linux-on-litex-vexriscv
    comment by buildbot · 2024-10-23 · in Coreboot port for 486 motherboard (UM8881/6)
  2. …for building a 32bit RISC-V CPU for de10nano. It also includes information about booting Linux. https://github.com/litex-hub/linux-on-litex-vexriscv The CPU will likely have a clock speed around 100Mhz, far slower than the 1.5Ghz 64bit…
    comment by jburgess777 · 2023-03-03 · in RISC-V Business: Testing StarFive's VisionFive 2 SBC
  3. Exciting!! This was the project I used: https://github.com/litex-hub/linux-on-litex-vexriscv
    comment by buildbot · 2023-02-06 · in Introduction to FPGAs
  4. Yep! You can run linux even on an entirely open source from hardware to software toolchain: https://github.com/litex-hub/linux-on-litex-vexriscv Though the FPGA IC itself of course is not open, the bitstream generation is, and there are…
    comment by buildbot · 2022-07-27 · in CosmicStrand: The discovery of a sophisticated UEFI firmware rootkit
  5. …"high-end microcontroller" rather than "low-end application processor" levels of performance. [1] https://github.com/litex-hub/linux-on-litex-vexriscv [2] https://1bitsquared.com/products/orangecrab
    comment by ohazi · 2021-01-11 · in FPGA dev board that's cheap, simple and supported by OSS toolchain
  6. …tools to do anything more complicated than an adder, and they were fast and worked flawlessly. [1] https://github.com/litex-hub/linux-on-litex-vexriscv [2] https://twitter.com/gregdavill - He posts a lot of really cool macro and microscope…
    comment by ohazi · 2020-11-09 · in What is a System-on-Chip (SoC), and why do we care if they are open source?
  7. A RISC-V linux system for the ECP5 can be built with the FOSS toolchain using vexriscv and litex: https://github.com/litex-hub/linux-on-litex-vexriscv also, step by step using a different core (rocket):…
    comment by kersny · 2020-01-02 · in RISC-V Stumbling Blocks